SEVERIN Mix & Go Instrucciones De Uso página 13

for about 2 seconds. Wait until the ice cubes
have collected in the bottom of the jug again
and then repeat the process, until the cubes
have been reduced to the required size.
Grinding top operation
∙ The grinding top is useful processing
spices, and for preparing pesto, dips and
purées.
∙ Cut the food to be processed into small
pieces and then put it into the grinding
top.
∙ Observe the maximum marking when
putting in the food. Do not overfi ll.
∙ Caution: Do not operate the appliance
when it is empty.
∙ Fit the blade unit in the grinding top and
turn it anti-clockwise all the way to lock it.
∙ Turn the grinding top over and fi t it to
the motor housing so that the two arrow
marks are aligned.
∙ Then turn it clockwise until it is heard
locking into place.
∙ Insert the plug into a suitable outlet and
use the rotary control to select the desired
speed setting or the pulse function (P).
∙ Remove the plug from the wall socket
after grinding. Wait until the motor has
come to a complete standstill before
removing the grinding top and the blade
unit.
Wind-up power cord storage
The power cord can be wound up for storage
on the underside of the unit. Unwind it
completely before operation.
Cleaning and care
∙ Always remove the plug from the wall
socket before cleaning the appliance.
∙ To avoid the risk of electric shock, do not
All manuals and user guides at all-guides.com
∙ Do not use abrasives, harsh cleaning
∙ Cleaning the blender jug:
∙ If necessary, the sealing gasket on
∙ If required, the blade unit for the blender
∙ Cleaning the grinding top:
∙ Caution: Neither of these parts are
clean the motor housing or the power
cord with water and do not immerse them
in water. The motor housing may be
wiped with a slightly damp, lint-free cloth.
solutions or hard brushes for cleaning.
To clean immediately after use,
fi ll the blender jug with around 700 ml
of warm water and a little detergent. Let
the appliance run for a short period as
described in the section Operation. Then
rinse the jug, lid and stopper in fresh
water.
the blender jug lid can be removed for
cleaning. Before the appliance is used
again, the gasket must be replaced.
jar can be detached for cleaning: fi rst
remove the collar under the jar by turning
it clockwise (see pic. A), and lift out the
blade unit (pic. B). Caution: The blades
are extremely sharp. The gasket in the
blender jug cannot be removed. Clean
the blade unit with a suitable brush.
Wipe the gasket with a moist cloth. To
re-assemble, place the blade unit on the
gasket, fi t the collar and lock it by turning
it counter-clockwise all the way, observing
the markings on the collar).
The grinder top and blade unit can be
cleaned in hot water and a little detergent.
dishwasher-safe.
13