Ingersoll Rand R37-160 Información Del Producto página 17

60313.16.03
Page 3: Home Page Selection
Figure 46: Home Page Selection
Table 17: Home Page Selection
Display Text Description
Auto Return to Enables the controller to return the display back to the
Home selected Home Page if there is no user activity for the
Delay Time shown. This is only enabled when an "x"
appears in the checkbox.
Delay Time Determines how many seconds of inactivity it will take
before the controller will return to the Home Page.
Select Home Used to select the Home folder.
Folder
Select Home Used to select the Home Page within the selected Home
Page folder.
Pages 4-5: Time & Date Settings
Figure 47: Time & Date Settings
All items are adjustable.
The following settings are displayed in this section:
Table 18: Time & Date Settings
Display Text Description
Hours Allows the current hour to be set. The hours format is
fixed on 24-hour.
Minutes Allows current minutes to be set.
Seconds Allows current seconds to be set.
Year Allows current year to be set.
Month Allows current month to be set.
Day Allows current day to be set.
Date Format Selectable between dd/mm/yyyy (default) and mm/dd/
yyyy.
Confirm New Used to verify that changes to selections are desired. An
Time and Date "x" must appear in the checkbox before any changes will
take affect.
EN-
All manuals and user guides at all-guides.com
The controller will continue to display any changes, even when the selections
have not been confirmed and the user exits the page, then returns. Cycling of
the power returns all selections to their current settings.
The controller does not support Daylight Savings Time .
Page 6: Backlight Settings
The following settings are displayed in this section:
Backlight
Brightness
Enable Backlight
Auto-Off
Backlight Auto-Off
Delay Time
The backlight will be switched on whenever any of the controller's
keys are pressed .
The START, STOP, LOAD, UNLOAD, RESET, and ACKNOWLEDGE keys on
the controller remain functional while the backlight is switched off . It
is recommended to press the ENTER key or one of the navigation keys
in order to switch the backlight on .
Pages 7-8: Ethernet Settings
NOTICE
Figure 48: Backlight Settings
Table 19: Backlight Settings
Display Text Description
Adjusts the brightness of the display.
Enables the controller to shut-off the backlight if
there is no user activity for the delay time shown.
Determines how many seconds of inactivity it will
take before the controller will shut-off the backlight.
NOTICE
Figure 49: Ethernet Settings
EN
80446339 Rev C