Feb: Flash Exposure Bracketing; Fel: Flash Exposure Lock - Hahnel MADUS 600RT Manual De Instrucciones

All manuals and user guides at all-guides.com
SET

FEB: Flash Exposure Bracketing

You can take three shots while automatically changing the flash output
for each shot. The camera will record three images with different
exposures: one exposed according to camera calculations, one
over-exposed and another under exposed. Over and under exposure
amount is user adjustable from -3 to +3. This function helps get correct
exposure especially in shooting moving objects or when environmental
lights are complex.
SET
• FEB will be cancelled after three photos are taken. For best results,
set the camera drive mode to "single" and ensure the flash is ready
before shooting.
• FEB can be used with FEC and FEL.
You can prevent the FEB from being cancelled automatically after
three photos are taken. (C.Fn-FEB ACL, Page 46)
The FEB shooting sequence can be changed. (C.Fn-FEB, Page 38)

FEL: Flash Exposure Lock

FEL can lock the correct flash exposure setting for any part of the
scene. With <ETTL> displayed on the LCD panel, press the camera's
<FEL> button. Check your camera manual for details of how to activate
<FEL> on your camera.
Modus 600RT
3. Press < SET > button again
to confirm the setting.
1. Press function button 3 <
>. The icon <
>
and the exposure bracketing
amount will be highlighted on
the LCD panel
2. Set the flash exposure
compensation amount.
• Turn the Select Dial to set
the amount.
• "0.3"means 1/3 step,
"0.7"means 2/3 step.
3. Press < SET > button again
to confirm the setting. Then
your FEC and FEB settings are
displayed on the LCD panel.
1. Focus the subject.
2. Press the <FEL> button
• Aim the centre of the view
finder at the required part of
the scene and press <FEL>
button
• The speedlight will fire a
preflash and the required
flash output for the subject is
17