M: Wireless Flash Shooting With Manual Flash - Hahnel MADUS 600RT Manual De Instrucciones

All manuals and user guides at all-guides.com
Slave Group A
ID=A
If three slave units are all set to <A> in terms of slave ID, these
slave units will be controlled as if they were one camera flash in
slave group A.
• When setting < RATIO A:B C >, group A, B and C will fire a flash
synchronously; when setting< RATIO A:B >, group C will not fire a flash
• If shooting under the situation that group C is toward the main shooting
subject, over exposure might occur
• In some EOS film cameras that support E-TTL autoflash, you cannot
perform multiple flash wireless shooting with a flash ratio setting
• The flash ratio of 8:1 to 1:1 to 1:8 is equivalent to 3:1 to 1:1 to 1:3 (1/2
step increment).
• The details of the flash ratio settings are as follows.
M: Wireless Flash Shooting with Manual
Flash
This describes wireless using manual flash. You can shoot with a
different flash output setting for each slave unit (firing group). Set all
parameters on the master unit.
Modus 600RT
ID=A ID=A
1 Setting the flash mode
• Press <MODE> button until
<M> is displayed
• Set the manual flash output
(Page 22)
2 Setting the number of flash
groups
• Press the Function Button 2
< > to set the groups
RATIO
to fire
• The setting changes as
follows each time you press
the < > button:
RATIO
ALL(RATIO OFF)→
A/B(RATIO A:B)→
A/B/C(RATIO A:B:C)
3 Setting flash output
Press Function Button 3
< > to select the group.
Gr
Turn the Select Dial to set the
flash output of the groups. Press
<SET> button to confirm
4 Taking the picture
Each group fires at the set flash ratio
29