Prepare Measurement - Beurer BM 58 Manual De Instrucciones

Touch screen activation switch
The device features a touch screen display. To prevent the
screen from being activated accidentally, keep the touch
screen activation switch set to OFF when the device is not
in use. To operate the device, move the touch screen activa-
tion switch to ON. When the touch screen display is touched
(START/STOP button
Tip: You can switch off the device at any time by setting the
touch screen activation switch to the OFF position.
Cuff holder
Thanks to the cuff holder on the underside of the device,
you have the option of conveniently storing the cuff. To do
so, push out the cuff holder with both thumbs until it locks
into place (see also Chapter: Inserting battery).
Icons in the display:
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. Measured pulse
5. Release air (arrow)
6. Memory display, average value ( ),
morning ( ), evening (
7. Risk indicator
8. "Change battery" icon
9. Arrhythmia recognition
All manuals and user guides at all-guides.com
or MEM button), a beep is output.
9
8
7
)
6
5
PC interface
The blood pressure monitor also allows you to transfer your
measured values to the computer.
For this, you will need a standard USB cable (included in
delivery) and the "beurer HealthManager" computer soft-
ware.
The software can be downloaded free of charge from the
download area under Service at www.beurer.com.
System requirements for the "beurer HealthManager"
PC software
• Windows 7 SP1 or higher
• USB 2.0 (Type A) or higher

4. Prepare measurement

Inserting battery
• Push the cuff holder
1
upwards at the rear of the
device until it locks into
2
place.
• Open the battery com-
partment lid.
3
• Insert four AA 1.5 V alka-
4
line batteries. making absolutely sure that you insert them
with the correct polarity as marked. Never use recharge-
able batteries.
• Replace the battery cover carefully.
26