CLEANING AND MAINTENANCE
B. Drain the accessories and let them air dry.
CLEANING AND MAINTENANCE OF MASKS
1. Disinfect the masks using cold disinfecting liquids, e.g.
bleach and water, vinegar
2. Rinse carefully and thoroughly under running warm water
and dry.
ATTENTION: do not boil or autoclave the masks.
TROUBLESHOOTING GUIDE
THERMAL PROTECTOR
To protect from overheating, the unit has an internal thermal
switch. If the internal temperature reaches a preset level, the unit
will automatically shut down and the power LED will turn red.
Turn the unit off for at least 40 minutes to allow the unit to cool
down (pic. 32).
PROBLEM
The device
does not
operate.
All manuals and user guides at all-guides.com
CAUSES AND SOLUTIONS
• Make sure that the plug is properly inserted into the
device.
• Make sure that the AC plug is properly fitted into the
electrical outlet.
• Push the ON/OFF button again.
11