Hapro seecret C200 Instrucciones Originales página 5

Problem
Some lamps do not burn
Lamps burn dimply when the unit
is not in use
Poor results.
Solution
a. Check for the lamp(s) involved the starter and switch using where necessary the starter from a
lamp that is functioning.
b. Check the de lamp(s), by swapping those that do not work with those that do.
Reverse the switch to the power cable.
a. The distance between the lamps and your face is larger than prescribed
b. When the lamps have been used for a long time, the capacity will decrease. This effect only
becomes noticeable after several years. You can solve this problem by selecting a slightly longer
session time or by having the lamps replaced.
- 5 -