Motor Zoom Reflector; Wide-Angle Diffuser - Metz MECABLITZ 58 AF-1 C digital Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

• Select the desired setting with the UP
- When „KEYLOCK Yes?" is displayed, the Key-Lock function is activated.
- When „KEYLOCK No?" is displayed, the Key-Lock function is deactivated.
Deactivating the KEYLOCK function
When a button is pressed, „UNLOCK Press these keys" is displayed . A correspon-
ding symbol
is displayed to indicate that the buttons are locked. To deacti-
vate the Key-Lock function, press both middle buttons for about 3 seconds. The
display is reset to its normal state when the KEYLOCK function is deactivated.

8. Motor Zoom Reflector

The zoom position of the main reflector can be adjusted for focal lengths of at
least 24 mm (35 mm format). For lenses with focal lengths of 18 mm or more,
the integrated wide-angle diffuser
.
The following zoom positions are available:
24 mm - 28 mm - 35 mm - 50 mm - 70 mm - 85 mm - 105 mm (corresponding
to 35 mm format)
When using the wide-angle diffuser
cally moved to the 24 mm position! Because of the wide-angle diffuser,
18 mm appears on the display (see 9).
Automatic zoom adjustment
This causes the zoom position of the main mirror
lens focal length. "AZoom" and the mirror position will then appear on the flash
unit's display panel.
Manual zoom adjustment
If the camera does not transfer the parameters for the lens focal length or for the
zoom position, the zoom position of the flash reflector has to be adjusted by
hand. "MZoom" will then appear in the LC display. See also 6.3.
and DOWN
buttons.
can be positioned over the main reflector
the main reflector
is automati-
to automatically adjust to the
If you use a zoom-lens and do not necessarily need the full guide number
and maximum flash range of the flash unit you can leave the zoom reflec-
tor at the position for the shortest focal length of the zoom lens. This will
provide full light coverage of the picture and eliminate the need to conti-
nually adjust it to the focal length of the lens.
Example:
You use a zoom lens with a focal length range of 35 mm to 105 mm. In this
case, set the position of the main reflector
Manual adjustment of the zoom position with AZoom
The zoom position of the main reflector
unit is used with a camera capable of data transmission, in order to achieve spe-
cial lighting effects (such as hot-spot, etc.). See also 6.3.
Once saved, „MZoom" will be indicated on the display.
Resetting to AZoom mode
• Touch the shutter release to begin a data transfer between the flash unit and
the camera.
• Continue changing the zoom position until AZoom appears on the display.

9. Wide-angle diffuser

With the wide angle diffuser
, focal lengths of 18 mm or more can be illumi-
nated (35 mm format).
Pull the wide-angle diffuser
out from the main reflector
and then release it. The wide-angle diffuser automatically folds downwards.
The main reflector automatically moves to the required position. The distance
readings and the zoom value are corrected to 18 mm on the display panel.
To insert the wide-angle diffuser
in.
to 35 mm!
can also be changed when the flash
as far as it will go,
, turn it upwards 90° and push it all the way
107

Publicidad

Tabla de contenido
loading

Tabla de contenido