Manual Time Setting; Time Zone Setting; Alarm Function; Temperature Display - Technoline WS 9180 Manual De Instrucciones

MANUAL TIME SETTING

Press and hold "CLOCK" for 3 seconds.
Press "SET/RESET" to select 12/24 hour time display. Activate the setting by pressing "CLOCK" again. The
weekday language (GE=German, FR=French, IT=Italian, SP=Spanish, En=English), second time zone, hours,
minutes, seconds, year, month and day may be set in the same manner.
Press "CLOCK" again to return to normal time display.

TIME ZONE SETTING

If you wish to see the current time for another time zone in the display, you may set the time zone. Please enter the
time difference in hours between your time zone and the second time zone you wish store. In the example of Los
Angeles the setting would be -10 hours. To see the 2. time zone, press "CLOCK". The 2. time zone will appear on
the display with the word "Zone". To return to the normal time zone display press "CLOCK".

ALARM FUNCTION

2 separate alarms may be set on your temperature station.
Press and hold "ALARM" for 3 seconds.
Use "SET/RESET" to set the hours for alarm 1 and press "ALARM" to confirm your selection. Set the minutes by
pressing "SET/RESET". After confirming your setting with "ALARM", the setting of the second alarm time is started.
Activating/ deactivating the alarm
To activate the alarm times, repeatedly press "SET/RESET". The bell symbols on the display will show activated
alarm times.
Stopping the alarm
When the alarm sounds, it may be deactivated by pressing "ALARM". The alarm will switch off automatically after 5
minutes if no button is pressed.
To completely deactivate the alarm, press "SET/RESET" repeatedly until the bell symbol for the alarm you wish to
deactivate disappears. The bell symbols on the display will show activated alarm times.
Viewing the alarm times
To view the first alarm time press the "ALARM" button once. To view the second alarm time, press "ALARM" again
and return to normal time display by pressing "ALARM" once more (the display automatically returns to normal time
if no button is pressed for more than 8 seconds).
Snooze function
To activate the snooze function press "Zz/REGISTER" upon hearing the alarm. The bell symbol and Zz on the
display will blink. After 5 minutes the alarm will sound again. To deactivate the snooze function, press "SELECT";
The bell symbol will stop blinking.

TEMPERATURE DISPLAY

Press and hold "SELECT" for 3 seconds.
Press "SET/RESET" to set °C (Celsius) or °F (Fahrenheit).
Confirm your selection by pressing "SELECT".
Minimum and maximum temperatures
Once set up, your station separately saves the maximum and minimum temperatures for each sensor and the
EN2