Measurement Display - boso Medistar S Manual Del Usuario

medistar_S_1305sd.qxd

Measurement display

54
After the end of the measurement, the
inbuilt valve opens automatically and
the cuff deflates rapidly.
The measured blood pressure values
(systole, diastole, pulse) are displayed
(see illustration 5).
Ill. 5
All manuals and user guides at all-guides.com
08.05.2013 10:19 Uhr
Systole
mmHg
Diastole
mmHg
Pulse/min.
Seite 54
The measurement is stored automatically
(except for guest mode, see below). If the
memory store is full (30 measurements),
the oldest measurement is deleted and
the current one stored.
Note on guest mode:
If a measurement value is not be kept,
press „MEMORY" while the measured va-
lues are still on display.