Filter Cleaning - IP Cleaning KLEEN 1/20 TC W&D P Manual Del Usuario

5. FILTER CLEANING

When sucking fine dust the filter will eventually get clogged and suction will go down. The filter
therefore needs to be cleaned to restore suction.
5.1 MANUAL FILTER CLEANING
The filter can be manually cleaned in the following way: turn the filter (A) until it unlocks and remove it
from the head, clean the filter under cold water (B). Let it dry (C) until completely dry. Reassemble te
filter.
A
5.2 SEMI AUTOMATIC FILTER CLEANING
The machine is equipped with a semi-automatic filter
cleaning system.
Close the suction inlet (A) by placing your hand on the end
of the handtube or by inserting it into the seat (B).
After closing the inlet wait 2-3 seconds until the maximum
underpressure has been built up. Press the filter cleaning
button (C) 5 times fast after each other. This action will
clean the filter and restore suction performance.
10
B
C
A
B
FIG. 13
FIG. 14
5x
C
ENGLISH