IP Cleaning KLEEN 1/20 TC W&D P Manual Del Usuario página 7

FIG. 6
4.3 VACUMING - INSERTING AND REMOVING THE HOSE
To vacuum insert the hose (A) into the suction inlet
(B). To remove the hose press the button (C) twist
and pull in one movement.
4.4 BLOWING - INSERTING AND REMOVING THE HOSE
The machine can also be used for blowing. In some
cases it is easier first to blow the debris away and
then afterwards collect it.
To use the blow function insert the hose into the
blow outlet (A) in the same way for the suction
inlet.
7
When vacuuming liquids it is necessary to remove
the filter:
remove the engine head (see also figure 3), rotate the filter
until it unlocks and remove it from its seat, reassemble the
head.
C
A
B
C
FIG. 7
A
FIG. 8
ENGLISH