Turning The Machine On - IP Cleaning KLEEN 1/20 TC W&D P Manual Del Usuario

4.5 TURNING THE MACHINE ON

The machine is turned on/off by pressing the start/
stop button (A).
To use the optional socket (B) see next chapter.
The aspirator can be equipped with an indicator (C)
which indicates when the pressure decreases. This
can be due to the filter being clogged and needs to
be cleaned (see later chapter) or the bag is full and
need to be replaced.
4.6 ADDITIONAL SOCKET AND AUTO START/STOP
The machine is equipped with an
additional socket that can be used in
connecting with a power tool. Connect
the power tool to the socket (A).
Remove the handtube and fix the
conical adapter (B). Insert the conical
adapter to the power tool (C). Turn the
machine to AUTO mode with the
switch (D). The machine will then start,
when the power tool is turned on and
stop with a delay (in order to empty
the hose) when the power tool is
turned off.
! WARNING - Do not operate without filter basket and float, as they prevent liquid from
entering the impeller and damaging the motor. Do not suck up any liquids without a sponge
filter installed.
! WARNING - To reduce the risk of back injury or falls, do not lift a vacuum cleaner heavy with
liquid or debris. Scoop or drain enough contents out to make the vacuum cleaner light
enough to lift in a comfortable manner.
NOTE: IF ACCIDENTALLY TIPPED OVER, THE VACUUM COULD LOSE SUCTION. IF THIS OCCURS, PLACE
VAC IN UPRIGHT POSITION AND TURN SWITCH OFF. THIS WILL ALLOW THE FLOAT TO RETURN TO ITS
NORMAL POSITION, AND YOU WILL BE ABLE TO CONTINUE OPERATION
! WARNING - Read the Safety Warnings and Instructions concerning the types of wet materials
that cannot be vacuumed with this product.
8
A
B
B
C
C
FIG. 9
D
A
.
ENGLISH
FIG. 10