Publicidad
COUNTERTOP KIT SPEED PRO
ASSEMBLY INSTRUCTIONS
1
CHECK THAT YOU HAVE RECEIVED ALL THE MATERIAL
CORRECTLY:
4
6
3
2
1
1
HOPPER SUPPORT FRAME
2
TM STAND HOPPER
3
TM STAND FILTER
4
SPEED PRO TANK STANDARD PEEL CHUTE
5
PODIUM WASTE BIN
6
COUNTERTOP KIT SPEED PRO INSTRUCTIONS
3
FIT PARTS ACCORDING TO ORIGINAL FIGURE TO OBTAIN
THE FOLLOWING LAYOUT:
!
Important
Check that you have purchased the right kit.
Verify that the peel fall height is slightly below the filter.
Zumex Group, S.A.
Zumex USA & Canada
5
(2 UNITS)
Tel: +34 961 301 251 · Fax +34 961 301 255 · zumex@zumex.com · Zumex Service Tel: +34 960 800 999 ·
Tel: 1 305 591 0061 · zumexusa@zumex.com · Zumex Service Tel: 1-877-ZUMEX-TA (1 877 986 3982)
2
DRILL COUNTER TO FIT PARTS ACCORDING TO DIAGRAM:
Recommendation for SPEED PRO BASIC model.
R5
Recommendation for SPEED PRO SELF SERVICE model.
!
Important
for the tap not to jut out from the counter.
R5
649
4
REMOVE COMPONENT (4) PEEL CHUTE TO AVOID
OBSTACLES, INSTALL THE MACHINE AND FIT THE PEEL
CHUTE BACK ON AGAIN, UNTIL YOU OBTAIN THE
FOLLOWING LAYOUT:
Speed Pro Basic
1:20
649
1:20
Speed Pro Self Service
www.zumex.com
05416.02
Publicidad
