Descargar Imprimir esta página

Product Description; Technical Specifications - GYM form AB SWIFT Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 3
3
Congratulations on your purchase of GYMFORM
our primary concern, so please ensure that you familiarize yourself with all
the information in this manual before using your GYMFORM
essential that anyone who intends to use this device reads and understands
the instructions provided. An informed user is a safe user. Thank you for
purchasing GYMFORM
AB SWIFT. We hope you enjoy your sessions.
®
• WARNING
Before embarking on any exercise programme, including the GYMFORM
AB SWIFT, consult your general practitioner and your physiotherapist.
Ensure that you read the instructions, warnings and precautions carefully
before using your GYMFORM
AB SWIFT.
®
GYMFORM
AB SWIFTis designed for healthy adults. However, the device
®
should be used with care. Read the following guidelines and the instruction
manual before using the product.
• Applying electrodes in the thorax area may increase the risk of
cardiac fi brillation.
• Using the GYMFORM
AB SWIFT while connected to high-frequency
®
surgical equipment may cause burns at the contact points of the
GYMFORM
AB SWIFT and may result in damage to the product.
®
• Operation of a short-wave therapeutic device or microwave oven in
the general vicinity (e.g. 1 metre away) may cause instability in the
output power of the GYMFORM
AB SWIFT.
®
• This is a powerful electrical muscle stimulation device and
may cause injury if you start with the most advanced exercise
programme right away. Start with a lower level and gradually
increase the intensity.
• Do not use on children or animals.
• Do not use while driving or sleeping or if you feel drowsy.
• Do not use in the bathroom or in other places with a high amount of
moisture or humidity.
• This device may be used by children aged 8 and over, by people with
reduced physical, sensory or mental abilities, and by people lacking
in experience and knowledge if they are appropriately supervised
or given suitable instructions on the safe use of the device and
understand the dangers its use en tails. Children should not be
allowed to play with the device. The cleaning and maintenance to
be performed by the user should not be done by children without
supervision.
• AVOID using the Gymform® AB SWIFT near devices that emit
electromagnetic waves, such as telecommunication antennas,
microwave ovens and X-ray equipment. It may interfere with these
devices.
• How long the electrodes last will depend on the kind of skin,
intensity level used and environmental and storage conditions. For
best results, we recommend replacing them after approximately 30
sessions. Spare electrodes are available at the point of sale where
you purchased the product. If you notice the electrodes lose power
too soon, moisten them with a damp cloth.
DO NOT use GYMFORM
AB SWIFT:
®
• If you have an electronic implant (such as a pacemaker) or suffer from
another heart problem.
• If you are, or think you might be, pregnant.
• If you have cancer, epilepsy or are under medical supervision for a
cognitive disorder.
4
sure there is a sightline between the remote control and the receivers. If
the signal does not reach the receiver, try again by ensuring there is a
sightline between the remote control and the receiver.
6. 10 output intensity levels to choose from.
7. 6 different power programmes to choose from.
8. The load-detection function automatically shuts off after 5 seconds
without contact with the skin.
9. Made with surface-mount technology to offer better quality and
effectiveness.
CONTENTS:
- 2 GYMFORM
AB SWIFT receivers
®
- 2 Self-adhesive electrodes
- 1 GYMFORM
AB SWIFT remote control
®
- 1 Instruction manual
- 1 Travel bag

PRODUCT DESCRIPTION:

1. Remote control.
2. Gymform® AB SWIFT receivers.
3. Self-adhesive electrodes.
4. Receiver indicator light.
5. Receiver ON/OFF button.
6. Button to turn on and increase intensity.
7. Remote control indicator light.
8. Programme button.
9. Button to turn off and reduce intensity.
BEFORE FIRST USE
1. To use the GYMFORM
AB SWIFT, 1 3V CR-2032 battery is required
®
for each receiver (2) and for the remote control (1) (not included). Slide off
the cover and insert the battery with the positive end (+) facing up. Close
the battery compartment cover.
2. Attach each receiver (2) to each self-adhesive electrode (3) using the
2 snap fasteners and make sure it is properly attached.
3. Remove the protective plastic backing from the self-adhesive electrode (3).
4. Place the self-adhesive electrode (3) on the part of the body to be treated.
Figure A provides examples of the areas that can be treated at the same time.
5. Press the receiver ON/OFF button (5) to turn on the receiver. The
receiver indicator light (4) will go on to show it is ready to be used.
INSTRUCTIONS
Once you have placed the self-adhesive electrodes (3) on the areas to be
treated, you have to turn on the receivers (2) by pressing the button (5) with
the symbol
, which means ON/OFF. Once you have done this, you can
choose from 6 different programmes and 10 intensity levels:
• Button to turn on and increase intensity (6): Press this button to turn on the
receivers and increase the stimulation intensity. Each time you press the
button, the intensity level will be increased (1-10). There are 10 levels in total.
• Button to turn off and reduce intensity (9): Press this button to turn off the
receivers and reduce the stimulation intensity. Each time you press the button,
the intensity level will be reduced (1-10). There are 10 levels in total. The
receivers can be turned off by pressing the button to the lowest intensity level.
• There are 10 stimulation intensity levels. Level 10 is the one that provides
the most stimulation.
• You can change programmes at any time by pressing the
AB SWIFT. Your safety is
• If you are breastfeeding.
®
• If you have a high fever.
AB SWIFT. It is
Women: before using your GYMFORM
®
• At least six months after the birth of your child (after consulting your
doctor).
• A month after having an intrauterine device (IUD) fi tted.
• At least three months after having a caesarean section (after consulting
your doctor).
• Until after the fi rst days of your menstrual period.
®
Before using GYMFORM
from your doctor or physiotherapist:
• If you suffer from back problems. In this case, the device should only be
used at low intensity levels.
• If you suffer from a serious disease or injury not mentioned in this section.
• If you were operated on recently.
• If you are diabetic and take insulin.
- Do not place one receiver on your chest and another on your back in such
a way that electricity passes through your heart. Do not place the receiver
on genitals, scars, moles, varicose veins or the head.
• Do not place the receiver on recent scars, infl amed skin, infected areas or
areas that are susceptible to acne, thrombosis or other vascular problems
(e.g. varicose veins), or any part of your body with limited sensitivity.
• Do not place the receiver on areas with injuries or limited mobility (e.g.
fractures or sprains).
• Do not place the receiver directly on metal implants. It should be placed
on the closest muscle.
Possible Adverse Reactions
There have been isolated reports of skin reactions caused by the use of
electro-stimulation devices, including allergies, prolonged skin redness and
acne.
If any of these symptoms occur, switch off the device and consult your doctor.
If you have never exercised before or have not exercised for a long
time: Consult your general practitioner.
Precautions:
• Do not use GYMFORM
• Do not use GYMFORM
that transmits electrical current to your body or with any other machine.
• Do not connect the metal snap fasteners or electrodes to any other object.
• Do not modify the product.
• Use only the electrodes supplied by Industex.
• Do not attach two self-adhesive electrodes together.
• If any of the electrodes is not attached properly, you will notice an itching
sensation.
SPECIAL FEATURES
1. Compact, wireless easy-to-use design.
2. Working range of up to 2 metres with practically no interference.
3. Thanks to the remote control (radiofrequency technology), the receivers
are easy to control regardless of where they are applied on the body.
4. Synchronization of several independent receivers without interference.
5. Synchronization of up to 10 independent receivers without interference.
If you acquire additional Gymform AB Swift receivers, you can use a total
of 10 at the same time and activate them with the remote control. Make
Programme button (8). Each time you press it, a new programme will begin.
• There are 6 GYMFORM
Programme 1
Programme 2
Programme 3
Programme 4
Programme 5
Programme 6
• The maximum recommended time for massaging each part of the body is
10 minutes.
• After using the product, turn off the receivers by pressing the ON/OFF
button (5) with the symbol
Load-detection function
• The receiver indicator light (4) will automatically go out if the device is not
in use for 60 seconds. This function prevents the battery from being used
if you forget to turn off the receivers.
Automatic timer function
• The device is default programmed to run for 10 minutes. It will
automatically shut off when the timer reaches the programmed time.
• When the device is in use (with a stimulation intensity of from 1 to 10), the
automatic timer function will start. When the device is on, if the programme
is changed while it is in use, the time will maintain the same countdown and
the device will automatically shut off when the preset time ends.

TECHNICAL SPECIFICATIONS:

Power Supply: 3 3V CR-2032 batteries
Battery:
Maximum voltage:
Output current:
Output intensity level:
AB SWIFT, you should wait:
®
AB SWIFT, you should obtain permission
®
AB SWIFT if your body is in contact with water.
®
AB SWIFT in combination with any other device
®
AB SWIFT programmes.
®
Rapid impulses: 18 rapid, consecutive impulses/contractions
every 5 seconds/1-second pause between series.
Massage: 16 medium-deep contractions every 10 seconds/1-
second pause between series.
Combination of 3 different kinds of contractions every 15
seconds/1-second pause between series.
1) Slow-deep contraction
2) Fast impulse
3) Slow-deep contraction
Combination of 2 different contractions every 2 seconds
continuously:
1) Massage: 2 seconds
2) Rapid impulses: 2 seconds
Combination of 4 different contractions every 8 seconds
continuously:
1) Rapid impulses
2) Deep contraction
3) Mild contraction
4) Deep contraction
Combination of 8 different contractions every 45 seconds
continuously:
1) Slow impulses
2) Deep massage
3) Slow-fast-slow impulses
4) Deep massage
5) Deep impulses
6) Deep massage
7) Mild massage
8) Deep massage
3V CR-2032
120V (max.)
70 mA (RMS)
1-10 (10 levels)
ENGLISH

Publicidad

loading