Twistorr 305 Fs Remote Controller Mounting - Agilent TwisTorr 305 FS Manual Del Usuario

Instructions for Use

TwisTorr 305 FS Remote Controller Mounting

This paragraph describes the fundamental operating procedures.
For installation of optional accessories, see "Technical Information".
Before using the controller make all electrical and pneumatic connections and refer
to TwisTorr 305 FS pump instruction manual.
To avoid injury to personnel and damage to the equipment, if the pump is
WARNING
laying on a table make sure it is steady. Never operate the TwisTorr 305 FS
pump if the pump inlet is not connected to the system or blanked off.
Once connected to the line voltage, to operate the controller in a very simple way,
NOTE
connect on the J1 connector the pre-wired mating connector that is supplied
together with the controller.
The pre-wired mating connector is a simple and quick way to allow the controller
to be operated (for instance, acting on the front panel), without having the need to
implement other wired external connections like Serial Com or Remote I/O.
The forepump and TwisTorr 305 FS pump can be switched on at the same time.
164 Agilent TwisTorr 305 FS Remote Controller User Manual