Serial Communication Descriptions - Agilent TwisTorr 305 FS Manual Del Usuario

Technical Information
The communication port mating connector is supplied with the RS 232 PCB
(AMP/Cannon or equivalent 15-pin "D" type male connector). For example, the
Transmit data signal from controller (pin 2) must be connected to the host
computer's receive data line (pin 2) and vice versa. Consult the host computer's
instruction manual for its serial port connections.
Agilent cannot guarantee compliance with FCC regulations for radiated emissions
NOTE
unless all external wiring is shielded, with the shield being terminated to the metal
shroud on the 0-subconnector. The cable should be secured to the connector with
screws.

Serial Communication Descriptions

This unit can comunicate by two different protocol:
protocol (old system) "letter"

"Window" protocol (new system)

These two protocols can be used as well with 232 or 485 media.
NOTE
Please use "Window" protocol for new development.
200 Agilent TwisTorr 305 FS Remote Controller User Manual