Controller Connection; J6 - Fan; J7 - Vent - Agilent TwisTorr 305 FS Manual Del Usuario

Technical Information

Controller Connection

J6 – Fan
The 24 Vdc, 150 mA maximum output voltage is present after START pushbutton is
pressed and will remain present until a fault condition is displayed on front panel
display or the turbopump is stopped.
This is a dedicated output for the optional TwisTorr 305 pump cooling fan
(see orderable parts table).
If you already have fan installed, use the available adapter cable to connect to the
pump.
Figure 31
J7 – Vent
Figure 32 Vent Connector
182
Fan Connector
Agilent TwisTorr 305 FS Remote Controller User Manual