Sony ZS-2000 Manual De Instrucciones página 39

Notes
• As long as "CD"
appears in the display,
the optical digital
output jack is in
operation and the jack
lights even if the CD is
in stop mode.
• If you play a CD-ROM
that is not for audio
use, noise may be
heard.
1
Remove the jack cover from the OPTICAL
DIGITAL OUT (CD) jack of this player and
connect the jack with the digital input jack of the
MiniDisc recorder or other component using the
digital connecting cable (not supplied) .
2
Turn on the power of this player and the
connected component.
3
Make the connected component ready for
recording.
4
Start playing a CD on this player.
Listening to TV, VCR and MiniDisc player/
recorder
to LINE IN
jack
Rear panel of
Audio connecting
this player
cable* (not supplied)
* For MiniDisc recorder: a cable with a stereo-mini plug on
both ends.
For TV, VCR: a cable with a stereo-mini plug on one end
and two phono plugs on the other end.
1
Connect the LINE IN jack of this player with the
line output jack of the MiniDisc player or other
component using the audio connecting cable (not
supplied) .
2
Turn on the power of this player and the
connected component.
3
Press LINE and start playing sound on the
connected component.
The sound from the connected component is
output from the speakers.
TV, VCR,
MiniDisc player/
recorder, etc.
to line
output jack
Setting Up
GB
39