1. Snap the hazard button into the hazard
switch bracket.
2 Attach the hazard switch assembly to
the radio housing with the supplied (4)
1/2" inch Phillips screws.
3. Attach the climate control to the radio
housing using the factory hardware.
4. Attach the (9) panel clips in the same
position as the factory radio trim panel.
(Figure A)
Note: If clips are not provided then
please remove the factory clips and re-
use them.
Continue to kit assembly
Kit Assembly 99-7338B
Kit preparation
4
PLASTIC
PLASTIC
METAL
PLASTIC
METAL
(Figure A)
PLASTIC
PLASTIC
METAL
PLASTIC