Publicidad
Idiomas disponibles
Idiomas disponibles
Number of statistical data (Statistical calculation mode)
The ratio between the weighing value and the weighing capacity, in a percentage, in
the weighing mode. (Capacity indicator)
Parameters of function.
Processing indicator
Stabilization indicator
Standby indicator
Processing indicator
The behavior of the balance differs depending on whether you "Press and release the
key immediately" or "Press and hold the key (for 2 seconds)".
The normal weighing operation is to "Press and release the key immediately". Do not
hold down the key unless you need to.
Press the key (Press and release the key immediately.) ..................................
Press and hold the key (for approx. 2 seconds) ..............................................
Key
The balance is able to be turned on or off.
The standby indicator is displayed when the display is turned off.
The weighing mode is enabled when the display is turned on.
A password is required when the balance is turned on using the password
function.
This key is always available. If this key is pressed during operation, the display
will be turned off.
In the weighing mode, readability
changes.
In the counting or percent mode, the
balance enters the storing mode.
The weighing units selected on the
function table are switched in order.
Weighing value, stored data, and items
Blinking
When pressed
When pressed and held (for 2 seconds)
The balance enters the function table
mode.
The response adjustment mode is
performed.
4
Response indicators
Comparator indicators
Hold mode indicator
Units
Interval output mode.
Standby indicator.
Internal output mode.
Active indicator.
English (EN)
Publicidad
