Energy Star - Honeywell HHT270 Serie Manual Del Propietário

INSTALLING THE DUAL ACTION HEPA-TYPE FILTER
The Dual Action HEPA-Type Filter with integrated carbon pre-filter
is supplied within the air purifier. It is wrapped to ensure purity.
• Unplug the air purifier.
• Turn the air purifier upside down on a flat surface.
The filter is visible from the bottom of the unit (Fig. 2).
• Remove the filter by grasping the filter from the finger notches.
There are small molded tabs that secure the filter in place and
prevent it from slipping out of the unit. Pull away from tabs and
up to remove. When removing a used filter that is not wrapped in
plastic, pull the black ribbon tabs to remove.
• Remove the protective plastic wrap from the Dual Action
HEPA-Type Filter
• Replace the filter in the unit with the black (activated carbon) side facing the air intake grille. The filter will
be held in place in the unit with the small molded tabs. Be sure to leave the black fabric ribbon accessible to
facilitate easy removal next time you have to replace the filter.

ENERGY STAR

OPERATION
• Ensure the air purifier is plugged into a working
electrical outlet
• Turn the Power Knob to desired setting
(O = Off, III = High, II = Medium, I = Low)
Portable air purifiers are more effective in rooms
where all the doors and windows are closed. It is
recommended that you run your air purifier while
you are at home to help clean the air.
Molded tabs
secure filter
Power ON LED
Cleaning
Levels
Power
Control Knob
4
The energy efficiency of this
ENERGY STAR certified model
is measured based on a ratio
between the model's CADR for
Smoke and the electrical energy
it consumes, or
CADR/Watt.
Filter Reset
Button
Fig. 2