Dc Connection Precautions - CTEK 1064 Manual Del Usuario

DC CONNECTION
14.
PRECAUTIONS
a) Connect and disconnect DC output clips only after setting
any charger switches to "off" position and removing AC
cord from electric outlet. Never allow clips to touch each
other.
b) Attach clips to battery and chassis as indicated in 14(e),
14(f), 15(b) through 15(d).
FOLLOW THESE STEPS WHEN
15.
BATTERY IS INSTALLED IN
VEHICLE. A SPARK NEAR
BATTERY MAY CAUSE BATTERY
EXPLOSION. TO REDUCE RISK
OF A SPARK NEAR BATTERY:
a) Position AC and DC cords to reduce risk of damage by
hood, door or moving engine part.
b) Stay clear of fan blades, belts, pulleys, and other parts
that can cause injury to persons.
c) Check polarity of battery posts. POSITIVE (POS, P, +)
battery post usually has larger diameter than NEGATIVE
(NEG, N, -) post.
4 • EN
20016572A US 0.8 NG, Manual, Print file 001.indd 4
All manuals and user guides at all-guides.com
d) Determine which post of battery is grounded (connected)
e) For Negative-grounded vehicle, connect POSITIVE
f) For Positive-grounded vehicle, connect NEGATIVE
g) Connect charger AC supply cord to electric outlet.
h) When disconnecting charger, turn switches to off, discon-
i) See operating instructions for length of charge
to the chassis. If negative post is grounded to the chassis
(as in most vehicles) see (e). If positive post is grounded to
the chassis, see (f).
(RED) clip from battery charger to POSITIVE
(POS, P, +) ungrounded post of battery. Connect
NEGATIVE (BLACK) clip to vehicle chassis or engine
block away from battery. Do not connect clip to carbure-
tor, fuel lines, or sheet-metal body parts. Connect to a
heavy gage metal part of the frame or engine block.
(BLACK) clip from battery charger to NEGATIVE
(NEG, N, –) ungrounded post of battery. Connect
POSITIVE (RED) clip to vehicle chassis or engine block
away from battery. Do not connect clip to carburetor,
fuel lines, or sheet-metal body parts. Connect to a heavy
gage metal part of the frame or engine block.
nect AC cord, remove clip from vehicle chassis, and then
remove clip from battery terminal.
information.
2011-06-17 11:16:07