Dc Connection Precautions - CTEK MUS 4.3 Manual

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DC CONNECTION 
14. 
PRECAUTIONS
a)  Connect and disconnect dc output clips only after setting 
any charger switches to "off" position and removing AC 
cord from electric outlet. Never allow clips to touch each 
other.
b)  Attach clips to battery and chassis as indicated in 15(e), 
15(f), 16(b) through 16(d).
FOLLOW THESE STEPS WHEN 
15. 
BATTERY IS INSTALLED IN 
VEHICLE. A SPARK NEAR 
BATTERY MAY CAUSE BATTERY 
EXPLOSION. TO REDUCE RISK 
OF A SPARK NEAR BATTERY:
a)  Position AC and DC cords to reduce risk of damage by 
hood, door or moving engine part.
b)  Stay clear of fan blades, belts, pulleys, and other parts 
that can cause injury to persons. 
c)  Check polarity of battery posts. POSITIVE (POS, P, +) 
battery post usually has larger diameter than NEGATIVE 
(NEG, N, -) post.
4 • EN
20016551B MUS 4.3 NG, Manual, Print file 002.indd 4
d)  Determine which post of battery is grounded (connected) 
to the chassis. If negative post is grounded to the chassis 
(as in most vehicles) see (e). If positive post is grounded to 
the chassis, see (f).
e)  For Negative-grounded vehicle, connect POSITIVE 
(RED) clip from battery charger to POSITIVE 
(POS, P, +) ungrounded post of battery. Connect 
NEGATIVE (BLACK) clip to vehicle chassis or engine 
block away from battery. Do not connect clip to carbure-
tor, fuel lines, or sheet-metal body parts. Connect to a 
heavy gage metal part of the frame or engine block.
f)  For Positive-grounded vehicle, connect NEGATIVE 
(BLACK) clip from battery charger to NEGATIVE 
(NEG, N, –) ungrounded post of battery. Connect 
POSITIVE (RED) clip to vehicle chassis or engine block 
away from battery. Do not connect clip to carburetor, 
fuel lines, or sheet-metal body parts. Connect to a heavy 
gage metal part of the frame or engine block.
g)  When disconnecting charger, turn switches to off, discon-
nect AC cord, remove clip from vehicle chassis, and then 
remove clip from battery terminal.
h)  See operating instructions for length of charge 
information.
FOLLOW THESE STEPS WHEN 
16. 
BATTERY IS OUTSIDE VEHICLE. 
A SPARK NEAR BATTERY MAY 
2011-12-02 14:21:17

Publicidad

Tabla de contenido
loading

Tabla de contenido