Publicidad
Idiomas disponibles
Idiomas disponibles
eng
● Keep the fl oor dry and free from slippery materials such as oil. There is a
danger of injury from slippery fl oors.
● Keep a safe distance of at least one metre away from the workpiece by
access restrictions or cordons if it protrudes from the machine. Access
restrictions or cordoning off of the working area reduce the risk of trapping.
● Keep all electrical connections dry and away from the fl oor. Do not touch
plugs or the machine with wet hands. These safety precautions reduce the
risk of electric shock.
● Never reach into the revolving rollers of the roller groove device. There is
a risk of injury.
● Do not reach into the area of the motor (23) and support (21) during opera-
tion with REMS Collum, REMS Collum 2, REMS Collum 2 Compact, REMS
Collum 22 V. Only hold the electric die stock by the motor handle (26) and
Collum 22 V. Only hold the electric die stock by the motor handle (26) and
Collum 22 V
the feed lever (15). There is a risk of injury.
● Do not operate the machine without protective devices (14). Exposure of
moving parts increase the risk of injury.
● Make sure that you always stand to the side of the hydraulic hand pump
(10) and that your body is outside the swivel range of the feed lever (15).
The feed lever of the hydraulic hand pump can "recoil" under certain circumstances.
● Never extend the feed lever (15). The feed lever is overloaded and can break.
● Do not use REMS Magnum RG (all models) without the foot switch or with a
defective foot switch. The foot switch is a safety device which offers better control
by allowing you to switch off the machine in various emergency situations by taking
your foot off the switch. For example: If clothing gets entangled in the machine,
the high torque will pull you further into the machine. Clothing can be wound so
tight around arms or other parts of the body that bones can be crushed or broken.
● Only connect the drive units of protection class I to a socket/extension lead
with a functioning PE conductor. There is a danger of electric shock.
● Check the power cable of the machine and extension leads regularly for
damage. Have these renewed by qualifi ed experts or an authorised REMS
customer service workshop in case of damage.
● Only use approved and appropriately marked extension leads with a suffi -
cient cable cross-section. Use extension leads up to a length of 10 m with
cable cross-section 1.5 mm², from 10 – 30 m with cable cross-section 2.5 mm².
● Never let the machine operate unattended. Switch off the machine during
longer work breaks, pull out the mains plug. Machines can cause hazards
which lead to material damage and/or injury when left unattended.
● Only allow trained persons to use the machine. Apprentices may only use
the machine when they are over 16, when this is necessary for their training and
when they are supervised by a trained operative.
● Children and persons who, due to their physical, sensory or mental abilities
or lack of experience and knowledge are unable to operate the machine
safely may not use this machine without supervision or instruction by a
responsible person. Otherwise there is a risk of operating errors and injuries.
Explanation of symbols
WARNING
WARNING
Danger with a medium degree of risk which could result in
death or severe injury (irreversible) if not heeded.
CAUTION
CAUTION
Danger with a low degree of risk which could result in minor
injury (reversible) if not heeded.
NOTICE
NOTICE
Material damage, no safety note! No danger of injury.
Read the operating manual before starting
CE conformity mark
1. Technical data
Use for the intended purpose
WARNING
WARNING
REMS roller groove device, REMS Collum (all models), REMS Collum 22 V, REMS
Magnum RG (all models) are intended for grooving pipes for pipe coupling systems.
All other uses are not for the intended purpose and are therefore prohibited.
1.1. Scope of Supply
REMS roller groove device: Roller groove device, grooving rollers 2 – 6" pair,
REMS Collum:
REMS Collum 22 V:
REMS Magnum RG:
1.2. Article numbers
REMS roller groove device for REMS Tornado, REMS Magnum,
REMS Amigo, REMS Amigo 2, REMS Amigo 2 Compact,
REMS Amigo 22 V
Roller groove device R 300 for Ridgid 300
10
, REMS Collum 22 V
, REMS Collum 22 V, REMS
Allen key, instruction manual.
Roller groove device, electric die stock, support,
2 cylinder-head screws M 8 × 25, adapter,
washer, cylinder-head screw M 8 × 16, grooving
rollers 2 – 6" pair, Allen key, instruction manual.
Roller groove device, cordless die stock,
support, 2 cylinder-head screws M 8 × 25,
adapter, washer, cylinder-head screw M 8 × 16,
grooving rollers 2 – 6" pair, Allen key, Li-Ion
21.6 V, 9.0 Ah battery, rapid charger, instruction
manual.
Roller groove device, roller groove machine,
grooving rollers 2 – 6" pair, Allen key, instruction
manual.
Roller groove device R 535 for Ridgid 535
Roller groove device N80A for Rex/Rothenberger/Super-Ego N80A 347003
Roller groove device Delta 4 for Rex Delta 4"
Grooving rollers 1 – 1½", pair
Grooving rollers INOX 1 – 1½", pair
Grooving rollers 2 – 6", pair
Grooving rollers INOX 2 – 6", pair
Grooving rollers 8 – 12", pair
Grooving rollers INOX 8 – 12", pair
Grooving rollers Cu 54 – 159 mm, pair
REMS Amigo drive unit
REMS Amigo 2 drive unit
REMS Amigo 2 Compact drive unit
REMS Amigo 22 V
Battery Li-Ion 21,6 V, 9,0 Ah (REMS Amigo 22 V)
Rapid charger 100 – 240 V, 90 W (REMS Amigo 22 V)
Rapid charger 100 – 240 V, 290 W (REMS Amigo 22 V)
Power supply 220 – 240 V/21,6 V, 40 A
(REMS Amigo 22 V)
Base frame for REMS Collum
Wheel set for base frame REMS Collum
Conversion kit Amigo / Amigo 2 / Amigo 2 Compact / Amigo 22 V
Safety foot switch for REMS Collum
Base frame for REMS Magnum RG
Base frame, mobile for REMS Magnum RG
REMS Jumbo, folding workbench
Conversion kit RG-T on L-T (for thread cutting)
REMS Herkules 3B
REMS Herkules XL 12"
REMS CleanM
REMS gear grease
REMS hydraulic oil
1.3. Applications
Steel pipes
Wall thickness (steel pipes)
Stainless steel pipes, copper, aluminium, PVC pipes
1.4. Dimensions
Roller groove device,
with hydraulic hand pump
Magnum 2000 RG-T,
with hydraulic hand pump
Magnum 2010/2020 RG-T,
with hydraulic hand pump
REMS Collum
with hydraulic hand pump
REMS Collum 2
with hydraulic hand pump
REMS Collum 2 Compact
with hydraulic hand pump
REMS Collum 22 V
with hydraulic hand pump and battery
1.5. Weight
REMS roller groove device
REMS Magnum 2000 RG-T, including roller groove device
REMS Magnum 2010 RG-T, including roller groove device
REMS Magnum 2020 RG-T, including roller groove device
REMS Collum
REMS Collum 2
REMS Collum Compact
REMS Collum 22 V, without battery
REMS Akku Li-Ion 21.6 V, 9.0 Ah
2. Start-up
CAUTION
CAUTION
Transport weights above 35 kg must be carried by at least 2 persons. When
transporting and installing the machine, please note that the machine has a
high centre of gravity with and without the base frame, i.e. it is top heavy.
2.1. Electrical connection
WARNING
WARNING
Caution: Mains voltage present! Before connecting the REMS Collum, REMS
Collum 2, REMS Collum 2 Compact, REMS Magnum 2000 RG-T, REMS
Magnum 2010 RG-T, REMS Magnum 2020 RG-T, the rapid charger or the
voltage supply, check that the voltage specifi ed on the rating plate corresponds
347000
to the mains voltage. Only connect drive units of protection class I to a socket/
347001
extension lead with a functional PE conductor. On building sites, in a wet
(REMS Tornado, REMS Magnum versions T DN ≤ 200, 8")
L×W×H: 510×415×405 mm
L×W×H: 795×510×610 mm
L×W×H: 750×510×610 mm
L×W×H: 510×415×470 mm
L×W×H: 510×415×580 mm
L×W×H: 510×415×525 mm
L×W×H: 510×415×480 mm
eng
347002
347004
347030
347053
347035
347046
347040
347047
347034
530000
540000
540001
530004
571583
571585
571587
571578
849315
849317
347007
347010
344105
344100
120200
340110
120120
120125
140119
091012
091026
DN 25 – 300, 1 – 12"
≤ 7,2 mm
(20.1"×16.3"×16.0")
(31.3"×20.1"×24.0")
(29.5"×20.1"×24.0")
(20.1"×16.3"×18.5")
(20.1"×16.3"×22.8")
(20.1"×16.3"×20.7")
(20.1"×16.3"×18.9")
26 kg (57 lb)
68 kg (150 lb)
80 kg (176 lb)
80 kg (176 lb)
32 kg (71 lb)
35 kg (77 lb)
33 kg (73 lb)
33 kg (73 lb)
1.1 kg (2,4 lb)
Publicidad
