Maintenance And Cleaning - Abicor Binzel MIG Robo Manual Del Usuario

MIG/MAG ROBO welding torch

9 Maintenance and cleaning

Scheduled maintenance and cleaning are prerequisites for a long service life and trouble-free
operation.
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to for the entire duration of maintenance,
servicing, mounting, dismounting and repair work:
• Switch off the power source.
• Close off the compressed air supply.
• Switch off the entire welding system.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
DANGER
Risk of burns
Risk of burns from hot coolant and hot surfaces.
• Switch off the recirculating cooling unit before starting maintenance, servicing, assembly,
disassembly or repair work.
• Wear protective gloves.
NOTICE
• Maintenance and cleaning work may only be carried out by qualified personnel
(in Germany see TRBS 1203).
• Check the coolant hose, seals and connectors for damage or leaks and replace if
necessary.
• Always wear your personal protective equipment when performing maintenance and
cleaning work.
All manuals and user guides at all-guides.com
9 Maintenance and cleaning
EN - 13