Assembly Instruction - Costway SP37361 Manual Del Usuario

ASSEMBLY INSTRUCTION:

1.PREPARATION:
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tools for assembling.
C. Before assembling please check whether all needed parts are available (at the above of this
instruction sheet you will find an explosion drawing with all single parts (marked with numbers)
which this item consists of.
2. ASSEMBLY INSTRUCTION:
Step 1: Attach the front stabilizer(38) and the rear stabilizer(51) to the main frame(44) with
carriage bolts(37), cap nuts(11) and arc washers(32).
32# d8* Φ 20*1.5*R30 4PCS
S13-14
-15
Step 2:
Connect the middle wire(28) with the induction line(34), and connect the tension control(27)
with the tension wire(35) as shown in FIG.2. Fix the support tube(26) with the main frame (44)
with the bolts(33) and arc washers(32).
Note: Tighten the screw(33) and the arc washers(32) after the Step 3.
37# M8*60 4PCS
11# M8 4PCS
37
38
32
FIG.1
35
34
44
11
06
11
32
11
32
37
51