Specifications; General Specifications - Amprobe Multimeter Serie Manual De Uso

SPECIfICATIoNS

general Specifications

Display:
Update Rate:
polarity:
power Supply:
power Consumption:
Apo Timing:
Apo Consumption:
low battery:
environment:
Temperature / humidity:
operating:
Relative humidity :
Storage:
Temperature Coefficient :
Sensing :
Clamp-on jaw:
+ & CoM terminals (all functions) : 600VDC/VAC rms
Jaw opening:
Dimension :
weight :
Safety lVD: Meets en60101-1:2001; en61010-2-032(2002), Category iii- 600 Volts ac
& dc; pollution degree : 2; class 2
�
eMC: This product complies with requirements of the following european Community
Directives: 89/336/eeC (electromagnetic Compatibility) and 73/23/eeC (low Voltage) as
amended by 93/68/eeC (Ce Marking). however, electrical noise or intense electromagnetic
fields in the vicinity of the equipment may disturb the measurement circuit. Measuring
instruments will also respond to unwanted signals that may be present within the
measurement circuit. Users should exercise care and take appropriate precautions to avoid
misleading results when making measurements in the presence of electronic interference.
3-3/4 digits 4000 counts lCD display
3 per second nominal
Automatic
standard 1.5V AAA Size (neDA 24g or ieC R03) battery x
typical 11 mA for ACA/DCA and 2.9 mA for other
functions
idle for 30 minutes
typical 10µA for ACDC- 100 and 90µA for ACDC- 100
TRMS
below approx. 2.4V
indoor operation, below 2000 m
0°C to 40°C (14°f to 122 °f)
< 80% Rh @ 31°C decreasing linearly to 50% Rh at 40°C
-20°C to 60°C (-4°f to 122 °f) / < 80% Rh
0. 5 x (specified accuracy)/ °C @ (0°C to 18°C or 28°C to
40°C)
Average sensing for ACDC- 100; True RMS for ACDC- 100
TRMS
DC 1000A or AC 800A rms continuous
50mm max
227 x 78 x 40mm (8.9 x 3.1 x 1.6 in.)
290 gm ( 0.6 lb)
10