Important Safety Information; Intended Use - Textron Greenlee GATOR ESG50GL Manual De Instrucciones

IMPORTANT SAFETY INFORMATION

• Do not cut steel or ACSR. Use this tool for cutting
copper and aluminum cable only.
• Do not use this tool for continuous use. After
30 – 40 cutting cycles, allow the tool to cool for
15 minutes.
• Do not secure this tool in a vise. A vise can
damage the housing.
• Do not use this tool in rain or wet conditions.
Any moisture inside the housing can damage
internal circuitry.
• Use this tool for manufacturer's intended use
only.
Failure to observe these precautions may result in
injury or property damage.
Do not allow any object to contact the battery
terminals.
• Do not immerse batteries in liquid. Liquid may
create a short circuit and damage the battery.
If batteries are immersed, contact your service
center for proper handling.
• Do not place the battery into a pocket, tool
pouch, or tool box with conductive objects.
Conductive objects may create a short circuit and
damage the battery.
• Do not place a battery on moist ground or grass.
Moisture may create a short circuit and damage
the battery.
Failure to observe these precautions may result in
injury or property damage.
Greenlee / A Textron Company
All manuals and user guides at all-guides.com
GATOR
4
® Battery-powered Cable Cutter
• Do not store the battery at more than 140° F
(60° C). Damage to the battery can result.
• Do not use another manufacturer's charger.
Other manufacturer's chargers may overcharge
and damage the battery.
• Do not attempt to open the battery. It contains
no user-serviceable parts.
Failure to observe these precautions may result in
injury or property damage.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070