Operation - Textron Greenlee GATOR ESG50GL Manual De Instrucciones

Operation

This tool is not insulated. When
using this tool near energized
electrical lines use proper personal
protective equipment.
Failure to observe this warning could
result in severe injury or death.
Do not cut cable under tension. Cable will fall and
may strike nearby personnel.
Failure to observe this warning could result in
severe injury or death.
Keep hands away from blades.
Failure to observe this warning
could result in serious injury.
Wear eye protection when using
this tool.
Failure to wear eye protection
could result in serious eye injury
from flying debris or hydraulic oil.
Greenlee / A Textron Company
All manuals and user guides at all-guides.com
GATOR ® Battery-powered Cable Cutter
• Do not cut steel or ACSR. Use this tool for
cutting copper and aluminum cable only.
• Do not use this tool for continuous use. After
30 – 40 cutting cycles, allow the tool to cool for
15 minutes.
• Do not secure this tool in a vise. A vise can
damage the housing.
• Do not use this tool in rain or wet conditions.
Any moisture inside the housing can damage
internal circuitry.
• Use this tool for manufacturer's intended use
only.
Failure to observe these precautions may result in
injury or property damage.
7
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070