Textron Greenlee GATOR ESG50GL Manual De Instrucciones página 8

Operation (cont'd)
Charging the Battery
Read the instructions supplied with the charger for
explanation of proper use.
Testing the Battery
A flickering battery load display indicates a low charge
level. A constant light when the tool is in neutral also
indicates a low charge.
Note: It is normal for the battery load display to light at
both the beginning of a cutting cycle and at the point of
maximum pressure.
Cutting Cable
1. Open the head by lifting the locking flange.
2. Position the cable in the open cutting head.
3. Close the cutting head.
4. Push down on the trigger lock. Pull the trigger.
The blades will begin to close.
5. Release the trigger when the cut is complete.
6. Push the retract button.
7. Return trigger lock to its original locked position.
Greenlee / A Textron Company
All manuals and user guides at all-guides.com
GATOR
8
® Battery-powered Cable Cutter
Pull trigger to cut
Push trigger lock down
to release
Push to retract blades
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070