Automatic Transmission Switch Over - Ortovox S1+ Instrucciones De Uso

INSTRUCTIONS
All manuals and user guides at all-guides.com
SIGNAL OVERLAP
The transmission signals are
measured and analyzed by the S1+.
If several transmission signals are
received that are transmitting at the
same time then a signal
OCCURS.
The signals overlap and can no
longer be technically distinguished.
In the worst cases, this can last for
several seconds.
The signal overlap is illustrated with
a stop sign and the distance "55".
You must wait until the signal over-
lap period has passed before you
continue your search.

AUTOMATIC TRANSMISSION SWITCH OVER

In the event of a
to which you fall victim (with your device
in search mode), the
switches to transmission mode after
2 minutes of non-movement. This is
indicated by a 10-second warning tone.
This makes it possible for you to
also be found if buried in an avalanche
while searching.
OVERLAP
SECONDARY AVALANCHE
S1+ automatically
RECOMMENDATION
If the number of victims
is not known, one of the
above-mentioned methods
must be applied for safe-
ty's sake before the search
is ended in order to detect
other victims and rescue
them if need be.
120 Sec
S1+
EN 55