TMEZON MZ-VDP-NE202 Manual Del Usuario página 6

Specification for doorbell
Sensor area
1/2.9"
Resolution
1920 X1080
PAL/NTSC
Standard
View angle
150
Standby current
Max60mA
Work current
Max200mA
Power supply
DC9V-DC15V
Work temperature -40~+50 C
Max 200PCS
Password capacity
RFID card capacity Max 200PCS
Max 200PCS
Fingerprint capacity
Install the outdoor doorbell
Outdoor installation
Method A
120
Method B
1:Please be far from the devices with intense radiation: TV, DVR, etc.
2:Do not disassemble privately to avoid the electric shock.
3:Do not drop, shake or knock the device, otherwise will damage the elements.
4:Choose the best position to install, the horizontal view is 150cm.
5:Please power down before installation.
6:Keep at a distance of more than 30cm with AC power to avoid interference.
7:Away from the water, magnetic field and chemicals.
GB - 9
Hatch
Flush casing
Hatch Hole
Angle bracket
Flush casing
Wiring diagram for outdoor doorbell
Model: MZ-VDP-NE202
Video output
resolution setting
1×4wires
Card unlock/password
unlock/exit button
unlock delay regulator
(2S-15S)
1×4wires
Light blue(NC)
Speaker volume
adjuster
a
Blue&black(NO)
a Setting button: Add card mode or Reset mode
1) Mode to add RFID card: In standby mode, short press the setting button, enter
the mode to add RFID card, swipe RFID card in the card swiping area,
you can add a card, you can Repeat the RFID card to add more RFID
cards, and then press the set button to exit the mode to add RFID card.
2) Reset mode: In standby mode, press and hold the setting button for
3 seconds to enter reset mode, then press the setting button three times,
you will hear a sound, all card numbers will be deleted, and it will return to
standby mode.
Note:
Different mode for the doorlock's connection
A mode: For the doorlock which is less than 12V1A
B mode:
1) For the doorlock which is more than 12V1A
2) If the cable exceeds 20 meters from the indoor monitor to the doorlock,
connect them as B mode only
Brown
DOOR
Black(GND)
EXIT
Red------------------VCC
White-------------AUDIO
Black------------GND
Yellow----------VIDEO
Red&Black-------VCC
White&Black---AUDIO
Black&Black-----GND
Yellow&Black--VIDEO
C mode
B mode
Black(GND)
A mode
Purple
GB -10 GB - 4
Monitor1
Monitor2