TMEZON MZ-VDP-NE202 Manual Del Usuario página 9

Setting
Language
Device-ID
System
Menu style
Keytone
Factory settings
Time
software upgrade
Restart the system
Formatting SD
Network
SD remaining space
Software version
Digital Frame
System
1. Please format the SD card with the device and copy the files to the corresponding
folder.
2. Restore factory settings: All parameters are restored to factory mode. Note that
TuyaSmart's device must be deleted together before it can be used again, otherwise it
cannot be added and used by other accounts.
3.The Device ID is an important configuration of the equipment in the system.
It must be configured correctly,Otherwise it will not work properly. If the current device
is connected to the Outdoor unit1, Device ID must be set to 1, and the others Slave monitors
must be set 2/3/4/5/6, then work normally.
Time
1: (Screen off): Monitor will be off with no operation within 10s
2: (Clock): Time will be displayed on the screen at standby mode
Digital Frame
1: The picture file must be copied to the Digital Frame folder, the picture resolution
must not be greater than: 2526x1576, the format is JPEG.
2: Long press the file to pop up the submenu, select "Delete" or "Delete All", and click
the file to enter the playback interface.
GB -15
English
1
Win10
on
ok
ok
ok
ok
18.6G/128G
V1.01-20201216
Devices
Enable switch
Unlock delay
Door1
Signal mode
Signal type
Record mode
Door2
Message
Motion detection
Motion detection duration
Camera1
Motion dispiay
Motion ringtone
Motion Detection Push APP
Camera2
1: If the channel is closed, it will be skipped when monitoring the polling screen. This
channel and APP will not display this channel. Please set it carefully.
2: When Motion Detection Push APP is closed, the phone will not receive any push
information.
Ring
Door1/Ring1
Scheduie
Door1/Ring2
Time
Ring mode
Door1/Ring3
Ring select
Ring volume
Door2/Ring1
Out door volume
Door2/Ring2
Door2/Ring3
1: The ringtone of each channel can be set to three time periods, and different ringtone
types and volume can be set, but it should, be noted that there can be no gaps and
overlaps between the three time periods, otherwise the system will play the default
parameters.
2: Please note that the volume setting of the Door bell cannot be greater than the
volume of the indoor monitor.
Door1
on
1
PAL
AHD1080
Video
off
off
20s
off
off
off
06:00-12:00
30S
Standard
1
8
5
GB -16 GB - 4