EN - English - Quick Guide:
This device needs to be upgraded to RouterOS v6.49.1 or the latest version to ensure compliance with local authority regulations!
It is the end users' responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be professionally installed
This "wAP LR9" series Quick Guide covers models: RBwAPR-2nD&R11e-LR9 (wAP LR9 kit)
This is Wireless Network Device. You can find the product model name on the case label (ID).
Please visit the user manual page on
Technical specifications, brochures, and more info about products at
The most important technical specifications for this product can be found on the last page of this Quick Guide.
Configuration manual for software in your language with additional information can be found
MikroTik devices are for professional use. If you do not have qualifications please seek a
This Device accepts input of a 24V DC power adapter, which is provided in the original packaging of this device.
First steps:
Make sure your ISP is allowing hardware change and will issue an automatic IP address.
Connect the device to the power source.
Connect with your PC to the MikroTik wireless network.
Open
https://192.168.88.1/
User name: a
dmin
and there is no password by default.
Click the "Check for updates" button and update your RouterOS software to the latest version, the device needs to have an active Internet connection.
After the update set your country, to apply country regulation settings.
Set your wireless password.
Set the router password.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing
accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the
Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product can be installed outdoors. Please read the mounting instructions carefully before beginning installation. Failure to use the correct hardware and
configuration or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own
risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate
measures!
Exposure to Radio Frequency Radiation:
environment. This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the general public.
Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.
ES - Español. Guía rápida:
Este dispositivo debe actualizarse a RouterOS v6.49.1 o la última versión para garantizar el cumplimiento de las regulaciones de las autoridades
locales.
Es responsabilidad del usuario final seguir las regulaciones locales del país, incluida la operación dentro de los canales legales de frecuencia, salida
alimentación, requisitos de cableado y requisitos de selección de frecuencia dinámica (DFS). Todos los dispositivos de radio MikroTik deben ser
instalado profesionalmente
Esta guía rápida de la serie "wAP LR9" cubre los modelos: RBwAPR-2nD&R11e-LR9 (wAP LR9 kit).
Este es un dispositivo de red inalámbrica. Puede encontrar el nombre del modelo del producto en la etiqueta del caso (ID).
Visite la página del manual del usuario en
teléfono móvil.
Especificaciones técnicas, folletos y más información sobre productos
Las especificaciones técnicas más importantes de este producto se pueden encontrar en la última página de esta Guía rápida.
Puede encontrar el manual de configuración del software en su idioma con información adicional en
Los dispositivos MikroTik son para uso profesional. Si no tiene calificaciones, busque un
Este dispositivo acepta la entrada del adaptador de alimentación de 24 V CC, que se proporciona en el embalaje original de este dispositivo.
Primeros pasos:
Asegúrese de que su ISP permita el cambio de hardware y emitirá una dirección IP automática.
Conecte el dispositivo a la fuente de alimentación.
Conéctese con su PC a la red inalámbrica MikroTik.
https://mt.lv/um
for the full up-to-date user manual. Or scan the QR code with your mobile phone.
in your web browser.
This MikroTik equipment complies with the European Union radiation exposure limits set forth for an uncontrolled
https://mt.lv/um-es
para obtener el manual del usuario actualizado.
https://mikrotik.com/products
at https://mt.lv/help
consultant https://mikrotik.com/consultants
en https://mikrotik.com/products
consultor https://mikrotik.com/consultants
O escanee el código QR con su
https://mt.lv/help-es