Keep-Warm Function - ARENDO 304559 Manual De Instrucciones

5. Usage
Press the lid opener to open the tiltable lid. Fill the kettle with cold water and press
the lid down until it locks into place.
Note: Do not fill the container above the maximum mark. The boiling water may
spurt out if the kettle is overfilled.
Then, place the kettle on the base plate. Buttons for selecting different water tem-
peratures are provided at the top of the handle. Press the "ON/OFF" button and
select the desired temperature using the "SET" button. The currently set temper-
ature flashes and the kettle heats the water to this temperature. Once the water
reaches the target temperature, all LED stops flashing. The heating element switch-
es off automatically and the boiling process is stopped. The appliance can now be
lifted and the water can be used. If you want to stop the boiling process early on,
you can press the "ON/OFF" button at any time.

5.1 Keep-warm function

The "KEEP WARM" function is intended to keep the boiled water warm for a long
period of time. Press the "ON/OFF" key and select your desired temperature with
the "SET" key. The currently set temperature will light up. Then press the "KEEP
WARM" key.The kettle activates the keep warm function. If you set 100°C, the ket-
tle will keep the water between 90°C and 100°C to prevent too much water from
evaporating. Press the "ON/OFF" button to start the keep warm function subse-
quently. As long as the "KEEP WARM" button in glowing, the function is enabled.
24
English