Dell PowerVault 725N Manual Del Usuario página 28

JO525bk0.book Page 22 Monday, January 27, 2003 12:29 PM
F i g u r e 1 - 1 5 .
C o n f i g u r a t i o n
slide assemblies (2)
4
5
6
1-22
Rack Installation Guide
All manuals and user guides at all-guides.com
I n s t a l l i n g t h e S l i d e A s s e m b l i e s f o r C e n t e r - M o u n t
two-post open-frame rack
12-24 x 0.5 inch pan-
head Phillips screws
(4 per slide)
Install the stiffening bracket in the appropriate holes at the back of the slide
assemblies and secure the bracket with a 12-24 x 0.5-inch pan-head Phillips screw on
each slide assembly (see Figure 1-16).
If the vertical rack is 3 inches wide, use the holes at the back end of the slide
assemblies (see Figure 1-16). If the vertical rack is 6 inches wide, use the holes located
3 inches in front of the holes at the back end of the slide assemblies.
Grasp the cable tray at each end and lower it into the holes on each slide assembly (see
Figure 1-7).
Press the front hook firmly into its socket until it clicks, securing it in place.
slide-release latch