Loading Manually; Removing Loads Manually; Operating Safely - Manual Use; Figure 2 Loading Manually - EdmoLift PL 2002 Manual Del Usuario

OWNER'S MANUAL
OPERATING INSTRUCTIONS
Figure 2. Loading Manually

Loading Manually

Add boxes or parts until the pallet is full. The unit
will gradually lower the pallet until it reaches the
bottom. See Figure 2.

Removing Loads Manually

Remove boxes or parts until the pallet is empty.
The unit will gradually raise the pallet. See
Figure 3.
Figure 3. Unloading Manually
WARNING!
Ensure that loading and unloading of
the PL 2002 is done in even layers.
Loading or unloading a load on one side
may cause the load to tip over and you
may be injured. This can also damage
the unit.
12 PALLET LEVELER PL 2002
(continued)
Figure 4. Warning - Load in Layers

Operating Safely - Manual Use

1. Never push the load off of the side of the unit. If
you do this, the frame of the unit may jump upward.
2. Never use the unit when anyone is sitting or
riding on the turntable.
3. Do not try to use this unit with damaged or
broken pallets. Broken pallets may have boards
or nails which hang down below the main part of
the pallet. As the pallet is turned, these boards
or nails may catch on the frame. The pallet may
stop turning suddenly and this can cause the load
to shift. You may be injured and the unit may be
damaged. If the boards or nails on the bottom of
the pallet extend down more than 3 mm, they will
interfere with the turning action.
4. Stay clear of the turntable when it is moving.
As the pallet turns, a part of the load may rotate
around and hit you.
5. Keep the area around the unit clean. Do not
allow any dirt, debris, spilled oil, or excess grease
to collect. These materials may cause you to slip
while the unit is operating and you may be injured.