Loading With A Fork Lift; Unloading With A Fork Lift; Moving The Pl 2002; Figure 5 Loading With A Fork Lift - EdmoLift PL 2002 Manual Del Usuario

Loading with a Fork Lift

1. Place the load on the lift, then lower the fork
lift. Before removing the load, be sure the unit is
carrying the weight, not the fork lift. See Figure 5.
• Lower the load until the airbag on the PL 2002
is fully compressed.
• Be sure the forks on the lift are clear of the
inside of the pallet.
WARNING!
If you skip these steps, the load may
drop suddenly when you remove the
fork lift. You may be hurt or the unit or
load may be damaged.
WARNING!
Never drop the load on the turntable.
If you do this while the turntable is
moving, the load may shift. You may
be injured or the unit may be damaged.
2. Be sure the load is centered on the
turntable.
Figure 5. Loading with a Fork Lift
WARNING!
If the load is off-center, it may shift when
the turntable is turned. You may be hurt
or the unit or load may be damaged.
1. Insert the forks into the pallet, and lift the pallet
clear of the top of the unit. See Figure 6.
• Be sure the pallet clears the top of the
turntable before you move the fork lift.
WARNING!
If you skip these steps, the unit may
jump up suddenly when you remove
the pallet. You may be hurt or the unit
or load may be damaged.

Unloading with a Fork Lift

Figure 6. Unloading with a Fork Lift

Moving the PL 2002

CAUTION!
Do not move the PL 2002 while it is
loaded. This will damage the base
frame of the unit. The pockets on the
base frame are designed to support an
unloaded PL 2002, but cannot support
any extra weight.
1. Remove any load from the top of the
PL 2002.
2. Insert the forks into the pockets in the base
frame. See Figure 7.
Figure 7. Moving the PL 2002
PALLET LEVELER PL 2002
13