Memory Operations - SciCan COLTENE StatClean Manual De Usuario

MEMORY OPERATIONS

Equipped with advanced power off memory capability, this unit is able to memorize the latest
quick timer setting.
Last timer setting recall.
1. Once the timer hits 00:00, either touch the Start/Stop key within 5 seconds to recall/repeat latest
quick timer setting, or wait 5 seconds for the latest timer setting to appear.
2. If unit powers off during a cleaning cycle, the latest timer setting will appear once powered on.
3. If the quick timer setting is changed when the cycle is not started, it will remain until the cycle
starts. However, it will not remain if the power is off.
4. If the Start/Stop key is touched twice during a cycle, the cycle and timer will stop. It resumes when
the Start/Stop key is touched twice again.
NOTE: To prevent accidental lockups of the touch-sensing control panel, please observe the following:
1. Do not touch two or more keys simultaneously.
2. Do not leave any liquids on the control panel.
3. Light touches are sufficient, do not aggressively push the control panel.
If the control panel is locked, do the following to reset it. If the first step does not work, move on to the
second step.
1. Turn off the power switch.
2. Turn off the power switch multiple times.
3. Unplug the power cord and wait for 5-10 minutes.
4. Leave the unit unplugged for several hours.
7