Product Assembly; Operation; Cleaning And Maintenance - cecotec CONGA ROCKSTAR 800 ULTIMATE Manual De Instrucciones

3. PRODUCT ASSEMBLY

Insert the metal tube into the device.
Fig. 3
Assemble the floor brush into the device.
Fig. 4
Place the device and its accessories on the charging base.
Fig. 5

4. OPERATION

Make the device stand on the floor brush and tilt the device to make it start operating.
Switch it on and press the fixer to fix it into position.
Fig. 6
Turn the screen's external selector to select a mode (ECO, Auto and Max).
Instruction for the use of basic accessories
Brush for dust: For curtains, and air outlets.
Accessory for furnitures: For beds and sofas.
Accessory for corners: Corners, doorjambs, window frames, etc.
Jalisco brush
Jalisco brush is especially designed to clean hard floors, but can be used efficiently to clean
any type of surface, such as soft floors.

5. CLEANING AND MAINTENANCE

Disconnect the appliance from the power supply and allow it to cool down before cleaning.
Use a soft, damp cloth to clean the product's surface.
Do not immerse the appliance in water or other liquid.
Do not use abrasive scouring pads, powders or cleaners.
Emptying the dust tank
Place a bin underneath the device and push the black tab, placed on the dust tank's lower
part, to empty the dust inside the dust tank.
Fig. 7
05564_Conga Rockstar 800 Ultimate_IM_LI_PE_YV_03210301.indd 33 05564_Conga Rockstar 800 Ultimate_IM_LI_PE_YV_03210301.indd 33
CONGA ROCKSTAR 800 ULTIMATE
ENGLISH
33
31/3/21 9:16 31/3/21 9:16