Standby Mode - Airzone AZXWSERVERAPP Manual De Usuario

Create/Modify programmes again
The programmes edit screen allows defining the following parameters:
 Programme
want to modify the name, press the name displayed in the scheduled programme.
Then, a pop-up menu appears for its modification.
 Standby mode
you want to deactivate the programme.
 Type of time schedule programming
temperature programming, a mode programming or ventilation if the system is
configured as master.
 Day/Group of days
programme should be activated.
 Start
vary depending on your installation.
 Time
 Temperature/Mode/Ventilation*. The programme start action is defined.
*Note: If you have selected Ventilation programming, the start status will be activated.
Temperature
o On: This option allows turning on the zone with the last operative
o Off: This option allows turning off the zone.
o Temperature: Turn the zone on and set the selected temperature.
Mode
 Fan speed
o Automatic speed
o Speed 1 or Low
o Speed 2 or Medium
36
. Indicates the name of the scheduled programme. If you
. Allows deactivating the programme. Select OFF in case
. The programme start parameters are defined. These parameters may
. Press the time and define the hour and minutes parameters.
: You can select between the following values:
temperature.
: This option allows selecting any mode available in the system.
*. Allows defining the following values:
Fig. 10
. Defines the day or days in which the
.
.
.
. Defines whether it is a