Zone Parameters - Airzone AZXWSERVERAPP Manual De Usuario

 Maximum Voltage 0-10 V: Allows configuring the maximum output voltage of the
gateway for speed control. The default value is 8 V. Configurable between 0 and 10 V, in
steps of 0.1V.
 Input configuration: Allows configuring the input as Return probe or Remote On/Off.
- Return probe: Default configuration. Allows measuring the return temperature
of the air conditioning equipment through an external probe.
- Remote On/Off: Allows a remote On/Off switch of the system. When restarting
the system, it returns to the status before the Stop.

3.3.2. Zone parameters

The Webserver allows displaying and modifying the
configuration parameters of the different zones
associated with
parameters vary according to the type of Airzone
system and the devices connected to it that may not
be available.
To access this option, select from the navigation
menu, the desired zone and then activate the
configuration mode
In the case you select the option All zones in the
navigation menu, the Webserver allows modifying
some parameters for all the system zones.
If you want to modify any parameter, press the
parameter and select the desired value (Fig. 15).
 Zone direction: Read-only parameter that
indicates the direction of the selected zone.
 Slaves: Read-only parameter that it indicates
if the selected zone has slave modules/exits
and their direction.
 Master: Allows defining the zone selected as master. It allows choosing between YES
and NO.
 Direction of Master: Allows defining the direction of the master zone with which there is
associated a 4 pipes fan coil.
 Window contact: Allows controlling the status of a zone depending on the opening of a
window. If activating this entrance, the zone air conditioning will be deactivated until its
status of rest is restored. To activate this function, set the input logic between the
following values: Normally opened or Normally closed. The OFF value disables this
function.
42
the selected system.
.
These
Fig. 15