If shown in Table 1 on Page 19, place the ring over the baby bottle to limit
the escape of steam.
Never switch on the device without filling it with water.
8
Only fill the device with water and only with the quantities of water quoted in
Table 1 on Page 19. Do not pour oil or flammable liquids into the warming
9
tank. Risk of fire!
Connect the device to the power supply.
5
"Home" mode: connect the power supply plug to the power supply.
"Car" mode: plug the vehicle adapter into the 12 V power socket of the
vehicle.
Before each use, check whether you have selected the correct mode ("Car"
or "Home").
10
"Home" mode: move the mode selector switch on the rear of the NUK Baby
6
Food Warmer to "Home".
"Car" mode: move the mode selector switch on the rear of the NUK Baby
Food Warmer to "Car".
New vehicles, in particular, have low-voltage protection as standard to
Note
protect the electronic components fitted in the vehicle. This can lead to
short battery running times and premature interruption of the heating-up
zur Verfügung gestellt von Gebrauchs.info
- 26 -
Aktualisierungsstand Gebrauchs.info November 2013
Figure 5
Figure 6
Figure 7