Publicidad
To guarantee safety, please follow these instructions.
Step 1: Unfold the trailer
Unfold the trailer and lock the frame. Attach the hook and loop fasteners and
lock the clasps on both sides as illustrated below.
Step 2: Attach the wheels
Attach one wheel on each side by inserting it into the axle. Press the button on
the rod underneath to slide the wheel firmly into place. Pull on the wheel repeat-
edly to ensure that it is securely attached.
Step 3: Attach the tow bar
To attach the tow bar, press the round end into the receptacle provided.
(Figure 1) on the left. Once the tow bar is in place, lock it using the quick-release
bolt (pos. A) and the locking pin (figure 2) provided. The curve in the tow bar
should be facing towards the right relative to the direction of travel.
Important: make sure that the locking pin is firmly locked – a loose drawbar
could result in loss of control of the trailer whilst in motion.
Parts:
1. Trailer
2. Tow bar and hitch connector (folded un-
derneath the trailer)
3. Foldable handlebar
4. Rear wheels with quick-release button
5. Front wheel
6. Safety flag
If it is necessary to
remove the wheel,
press the button on the
rod underneath whilst
simultaneously pulling
the wheel out.
Publicidad
