Squeegee Installation And Adjustment; Squeegee Adjustment - IPC CT80 Manual De Instrucciones

Squeegee installation and adjustment

Switch the machine on, lower the squeegee by pressing the suction motor button.
Place the squeegee in the slots provided on the support (fig. 4), then tighten the fastening knobs
and insert the suction hose.

Squeegee adjustment

The squeegee blades scrape the film of water and detergent from the floor and prepare the way
for perfect drying. With time, the constant rubbing makes the edge of the blade in contact with the
floor rounded and cracked, reducing the drying efficiency and requiring it to be replaced. The state
of wear should be checked frequently.
For perfect drying, the squeegee must be adjusted in such a way that the edge of the rear blade
bends during operation by about 45° with respect to the floor at every point. The angle of the blades
can be adjusted using the screw (fig. 5, ref. 1), while the height of the squeegee from the floor can
be adjusted by changing the height of the two wheels (fig. 6).
5
1
4
6
GB 17