Practical Guide For The Operator; Preparing The Machine For Work - IPC CT80 Manual De Instrucciones

Ocultar thumbs Ver también para CT80:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 155

PRACTICAL GUIDE FOR THE OPERATOR

Before starting work, wear overalls, ear protectors, non-slip and waterproof shoes, mask to
protect the respiratory tract, gloves and all other personal protection devices necessitated
Do not leave the machine unattended or parked with the key in the switch and the parking
If you are using the machine for the first time, we recommend trying it out on a large obsta-
cle-free surface first to acquire the necessary familiarity.
To avoid damaging the surface of the floor you are cleaning, avoid rotating the brushes with
The machine is fitted with a driver detection device. It is only possible to start the machine
while seated correctly in the driving seat. The device halts the machine if you get up from
Always dilute the detergent according to the manufacturer's instructions. Do not use so-
dium hypochlorite (bleach) or other oxidants, particularly in strong concentrations. Do not
use solvents or hydrocarbons. The water and detergent temperature must not exceed the
maximum indicated in the
The machine has been designed for use with low-foam biodegradable detergents made spe-
For a complete and up-to-date list of the detergents and chemicals available, contact the
Use products suitable for the floor and dirt to be removed only.
Follow the safety regulations on use of detergents given in the section "Safety regulations".

Preparing the machine for work

Proceed as follows before starting work.
Check that the display shows the batteries to be fully charged. Recharge if necessary. See
the
"Battery maintenance and charging"
Make sure that the dirty water tank is empty. Empty it if necessary, see
water
tank".
Make sure that the solution tank is full. Fill it if necessary, see
tank". If the machine is not fitted with the "Chem-Dose" accessory, add detergent to the
tank in the required percentage, using the measuring cap.
! WARNING!
by the work environment.
! WARNING!
brake disengaged.
! IMPORTANT!
! WARNING!
the machine stationary.
! IMPORTANT!
the seat.
! WARNING!
"Technical
specifications". They must be free of sand and/or other
impurities.
cifically for scrubber driers.
Manufacturer:
section.
GB
"Emptying the dirty
"Filling the water/detergent
20

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ct81Pt80Lavamatic 80

Tabla de contenido