Touch Control Panel; Main Screen; Temperature Setting - Lotus BCAO1618 Manual Del Usuario

TOUCH control panel

MAIN SCREEN

28 - 08 - 2015 11:30
24° 24° 24°
3° -10° 3°
P
SWITCHING THE EQUIPMENT ON AND ACTIVATING THE ZONES
28 - 08 - 2015 11:30
12° 24° 24°
3° -10° 3°
P
1
3 s

TEMPERATURE SETTING

28 - 08 - 2015 11:30
24° 24° 24°
1
1
3° -10° 3°
P
3°
Set C
On
code T7100008 - 0215 - rev. 00
If present, it indicates that a USB key is in-
serted in the relevant port
Current temperature
Allows the temperature to be set
Set temperature
Zone activation
Light on/off
(black=lights off - green= lights on)
Programming
Configuration menu
Equipment on/off
(red= OFF - green= ON)
28 - 08 - 2015 11:30
12° 24° 24°
3° -10° 3°
2
P
3 s
28 - 08 - 2015 11:30
24° 24° 24°
40°
C
Set
3° -10° 2 3°
On
P
Increase/decrease the values
Press it to make the pop-up disappear and save the
entered value.
Press it to make the pop-up disappear without sav-
ing the entered value.
Pressing the button switches the corresponding
zone on/off
Grey: zone not active
Yellow: zone has not yet reached the operating
temperature
Blue: zone is hot (ready for use).
28 - 08 - 2015
24°
3°
28 - 08 - 2015 11:30
24° 24° 24°
3° -10°
P
28 - 08 - 2015 11:30
24° 24° 24°
40°
C
Set
3° -10°
On
3
P
13
11:30
24° 24°
-10° 3°
If a core probe
21°
is
it
P
the detected
temperature
1
Press the indicated
button for 3 seconds: the ma-
chine is now powered.
2 Activate the switches
3°
the various zones of the equip-
ment (tub, refrigerated cell, dis-
play, etc.) by pressing them for
at least 3 seconds: the colour of
the switch will turn from grey to
green.
1
Set the temperature by
touching the symbol of the rel-
evant zone (tub, hot cabinet, su-
perstructure, etc.).
2 A pop-up will appear and the
3°
buttons are used to set
the desired value (within the de-
fault factory-set limits)
3 Confirm the entered tem-
perature and make the pop-up
disappear by pressing the
button.
present,
indicates
of
EN
EN