Lotus BCAO1618 Manual Del Usuario página 39

USB
Parametri
HACCP
Storico
Programmazione
5 4
USB
Selezionato download
Confermare?
6
ALARMS:
Message Description
N-s Serial communication error
E01 AN1 probe error
E02 AN2 probe error
E03 AN3 probe error
E04 AN4 probe error
E05 AN5 probe error
E06 AN6 probe error
E07 PT1 probe error
H-t Display compressor high temperature alarm
L-t Low temperature alarm
Cs Dirty condenser signal
Usb USB error
(*) The "H-t" message is displayed until an operator presses a button even if the alarm has been restored and therefore the compressor
resumes regular operation.
The presence of an alarm is also signalled by the buzzer being activated. Simply press the main On/Off button to switch the buzzer
off. After the deactivation, the buzzer remains off even if other alarms are activated.
If all the alarms are restored, the buzzer will be enabled again, therefore, upon the next alarm, the buzzer will be activated by the
control.
NO POWER
If there is a power cut, the equipment restores the following settings when the power returns:
- Machine ON/OFF state.
- Zone ON/OFF state.
- State of the light.
- Programming state (Manual or Weekly)
NO POWER SUPPLY WITH THE WEEKLY PROGRAM ACTIVE
If the power is cut during an active weekly program (e.g. black-out), the control resumes the program when the power returns.
EN
USB
Turn off the various zones by actuating
>
>
the respective switches and the ON/
>
OFF switch.
>
Insert the USB key into the preset slot
near the panel
Select USB as described previously in
1
points ,
page, the SETTINGS menu.
2 3
and of the previous
Reset
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
Manual (*)
Manual
Automatic
Automatic
16
A submenu appears in which you can
decide what to download to the USB key
(Parameters, HACCP, Log, Programming).
4
Scroll the various items using the
and arrows to select which
data to copy to the USB key.
5
Select the desired item by pressing
the button.
6
A pop up message asks for authori-
sation to download; confirm using the
button or exit from the screen us-
ing the button.
The data are now copied to the USB key.
code T7100008 - 0215 - rev. 00