Lotus BCAO1618 Manual Del Usuario página 38

WEEKLY PROGRAM
28 - 08 - 2015 11:30
24° 24° 24°
3° -10° 3°
P
1
3 s
EXAMPLE OF GUIDED USE
1 Access the weekly program by press-
ing the relevant button for at least 3 sec-
onds: the relative screen appears with the
''Monday-Day'' setting.
If the program day is to be changed, press
the button repeatedly until the de-
sired day is reached.
Times can be set for each zone (tub, re-
frigerated cell, display, etc.) which involve:
START indicates the time when the zone
is to go on;
READY indicates the time when the
zone must be ready to be used: this
means that the equipment will be auto-
matically switched on via the control well
in advance for it to be hot at the set time.
START indicates the time when the zone
is to go off.
The LIGHT button allows you to set the
time when the lighting should go on
(START) and off (STOP).
7
Data e ora
>
2015
Anno 2015
Mese
Giorno
6
Ora
Minuti
5
4
Parameters: menu reserved for the Ser-
vice.
Firmware Versions: indicates the version
of firmware installed. Hide the screen by
touching it.
Language: after having selected the item
a screen appears on which you can set
code T7100008 - 0215 - rev. 00
Lunedi
Giorno
START 11:00 ------- 12:00
READY ------- 11:30 -------
2
STOP 15:00 15:00 15:00
C
START and READY
exclude each other, that is, both
cannot be set on the same day for the
same zone.
If the STOP has not been set
for a zone, the START and
READY values set on that day
are not accepted.
Enter the program times by
the zone and
ues with
4 Confirm each entered value with the
button.
Press the
without saving the entered value.
the language of the screens by simply
touching it.
>
Consumption: provides a detailed sum-
3
mary of the consumption of the various
7
components of the equipment (light,
11
30 compressor, etc.).
The data are provided divided into:
- daily consumption;
- consumption during the last week;
- consumption during the last month;
- consumption during the last year.
The various components are scrolled
through using the
whereas you can exit the screen by press-
ing the
System info: menu reserved for the Ser-
vice.
12:00
12:00
15:00
4
5
2
touching
3
entering the desired val-
.
button close the pop-up
and arrows,
button.
15
Lunedi
Sera
START 17:00 ------- 18:00
READY ------- 17:30 -------
3
STOP 23:00 23:00 23:00
C
6
5
Press the button to set other pro-
gram times for the same day (e.g. for the
evening) or to access the program of the
following days.
Exit the screen and save ALL the values
entered (Monday, Tuesday, etc.) by press-
ing the button.
C
The button cancels all the pro-
grams.
HCCP: the control logs the temperatures
detected by the probes in the past days
every five minutes. The user can graphi-
cally display these detections by activat-
ing the HACCP menu.
Data e ora
>
2015
Anno
Mese
Giorno
Ora
Minuti
exits from the screen
scrolls the various probes
scrolls the days, increasing or
decreasing them
18:00
23:00
>
2015
3
7
11
30
EN
EN